Operator's Manual

CLEANING PROCEDURE

WARNING! Unload and clear the Airsoft gun of all BBs before

cleaning.

Cleaning procedure

The Airsoft gun barrel should be cleaned and lubricated after each shooting session.

Regular cleaning prevents the effects of BB residue buildup, and ensures all parts are

cleaned properly.

1. Ensure that the safety is engaged

2. Disable Hop-Up by dialing to the normal position

3. Remove the magazine and clear the chamber of loaded BBs

4. Disassemble the receiver (see Disassembly section)

5. Steps to use cleaning rod:

a. Cut a piece of clean cotton cloth to 1 inch by 0.5 inch size. Insert one end

of the cloth into the hole in the cleaning rod (adjust the length of cloth for

smooth entry into the barrel)

b. Wind the cloth around the cleaning rod

c. Insert the cleaning rod into the inner barrel, turning the rod as you insert into

the barrel

d. Remove the cleaning rod and check the cotton cloth for dirt. Repeat steps a.

through c. when necessary

6. Clean the remainder of the Airsoft gun with cotton-tipped swabs, or general

purpose cleaning cloths.

cleaning rod

cotton

cloth