Operator's Manual

FRONT SIGHT ADJUSTMENT
1. The front sight can be moved up and down to zero the sights.
2. Turn counter clockwise to raise the post.
3. Turn clockwise to lower the post.
REAR SIGHT ADJUSTMENT
1. Flip the rear sight between general and precision aiming.
2. To adjust the horizontal point of impact, rotate the windage knob located on the
rear of the sight.
3. To adjust the vertical point of impact, rotate the sight elevation knob located on the
left and right side of the sight.
The sight assembly is marked in
millimeters for precise adjustments
UP DOWN
Turn Clockwise Turn
Counter-Clockwise
0-2
Windage
Knob
!
WARNING:
-If turned too far, the front sight will come off .
FRONT AND REAR SIGHT ADJUSTMENT
Large
Aperture
Use this position
for full auto fi ring
Small
Aperture
Use this position
for precision fi ring
Rear Sight
Aperture
Elevation
Knob
KM4 KR SERIES
16