Operator's Manual

20
SOLUTIONS
Add silicone to cylinder / main seal/ rails
Release hop-up or replace bucking
Replace magazine lip
Add silicone oil to valves
Replace base plate lock
Replace magazine base seal
Replace cylinder
POSSIBLE CAUSE
Dry internal
Hop-up adjustment too tight
Bended magazine lip
Dry O-ring
Broken base plate lock
Worn out base seal
Broken Cylinder tap
SYMPTOMS
Bolt jams / Will not complete cycle
Double feeds BBs into
chamber / BBs roll out of barrel
BBs will not release from magazine /
bent mag lip/ check BB condition
Leaking release valve & charging valve
Magazine base plate will not lock
Magazine base leaking air
Cylinder will not load BBs into chamber
BASIC TROUBLESHOOTING GUIDE FOR SMG