Operator's Manual
13
GENERAL MAINTENANCE FOR KWA GAS BLOW BACK
you purchased your KWA products. Any other type of lubricant may damage the
products.
Lightly lubricate frame rails, recoil spring and moving parts. With few drops of oil and
parts movement to insure oil penetration, particularly lubricate the chrome piston unit,
slide rail, frame rail, barrel lock-up block and recoil spring.
lubricating silicone oil, it will extend the life of the seal and o-ring and prevent gas leak.
CLEANING PROCEDURE
The Airsoft gun barrel should be cleaned and lubricated after each shooting session.
lubricated properly.
b. Wind the cloth around the cleaning rod
c. Insert the cleaning rod into the inner barrel, turning the rod as you insert it into
the barrel
through d when necessary
purpose cleaning cloths.
cleaning rod
cotton
cloth
H&K MP7