Operator's Manual

LOADING HIGH CAP MAGAZINE

1. Release the magazine by pressing the magazine release button.

2. Open the magazine trap door and pour the Airsoft BBs into the chamber.

Close the door when the chamber is full.

3. Turn the winding wheel on the bottom of the magazine to tighten the spring

tension. This will allow the Airsoft BBs to feed through the top of the magazine.

4. Insert the magazine into the Airsoft gun until it clicks into place.

Note: Spring tension will unwind as you re the gun. Continue winding the

magazine regularly as necessary to empty the high cap magazine.

Loading safety tips:

• Switch the selector to safe

• Be sure the safety cap is on

• Keep your nger off trigger at all times

WARNING: Use only 6mm high grade BBs. Using low grade

BBs will damage Airsoft gun.

Note: Always use KWA Perfect BBs, size 0.2 or 0.25g. Using only KWA Perfect BBs

can give your Airsoft gun its best performance. Using recycled and low grade BBs

may damage the gun.

Magazine

Release

Button

Magazine

Trap Door

Winding Wheel

H&K G36C