Operator's Manual

SIGHT ADJUSTMENT

To fold: Press stock release lever

and fold stock around until it click

into place

To unfold: Gently lift up on stock to

release from body. Swing stock into

open position until it click into place.

FOLDING STOCK

CLOSE RANGE LONG RANGE

Adjust the sight vertically by turning elevation adjusting

screw using 2.5mm hexagonal key for the elevation screw.

Turning adjusting screw clockwise and counterclockwise

to lower and raise the rear sight respectively

Adjust the sight horizontally by turning wintage

adjusting screw using 2.5mm hexagonal key for the

elevation screw. Turning adjusting screw clockwise and

counterclockwise to shift the rear sight to right and left

respectively.

H&K G36C