User Manual
Table Of Contents
- 1.1 Intended Use
- 2.1 Unpacking and checking the contents
- 1. Introduction
- 2.1 Unpacking and checking the content
- 1.5 About the status LED
- 1.4 Product elements
- 1.3 Technical specifications
- 1.2 Safety intructions
- 3. Using on screen menu
- 2.8 Best practice for Windows 10
- 2.7 Removing a fiber cable
- 2.6 Replacing the SFP module
- 2.5 Start up
- 2.4 media4Kconnect in the Matrix Vario System
- 2.3 Installing the extender
- 2.2 Mounting kit
- 4.1 Menu Features
- 3.4 Settings
- 3.3 Update menu
- 3.2. Features menu
- 3.1. System status
- 5.2. Disposal
- 5.1 Extender Care
- 4.1.2 Matrix Switching System
- 6. Support & First Aid
- 8.1 Switches
- 9.1 extended warranty
- 10. Address & phone / emails
- 11. Notes
10 | kvm-tec kvm-tec | 11
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
1. INTRODUCTION 1. INTRODUCTION
1.3 TECHNICAL SPECIFICATIONS
Type: media4Kconnect Special redundant SET
media4Kconnect Special uncompressed SET
Model: media4Kconnect Fiber KVM Extender
Power plug input voltage 2 x 12 VDC 2 A
external Power supply redundant
supply tolerances DC: +20% / -15%
Redundant
Power supply 12 VDC > 2A
Power requirement 12W without USB devices
Operating
temperature 0 ºC to 45 ºC (32 bis 113 °F)
Storage temperature −25 ºC bis 80 ºC (-13 to 176 °F)
Relativ humidity: max. 80% (not condensing)
Casing material: anodized aluminum
Dimension: Local (CPU): B104 x H32 x D175 mm/B4.2 x H1.69 x D7.2 4inch,
610g/1.34 lb.
Weight Remote (CON): B104 x H32 x D175 mm/B4.2 x H1.69 x D7.2 4inch,
620g /1.36lb.
Shipment weight 3040g/ 6,7 lb.
Expected product life 82 820 hours / 10 years
1.4 PRODUCT ELEMENTS
Remote Extender (CON)
Nr. Name Function
1. Audio in Audio in from microphon
2. Audio out Audio out to speaker
3. RS232 RS232 plug
4. DC power supply for 12V/2A
5. DC power supply for 12V/2A
6. kvm-link link for ber cable main
7. kvm-link link for ber cable secondary/redundant
8. dp out DisplayPort 1.2 out to monitor
9. USB USB 2.0 from Keayboard and mouse
10. reset Reset button
11. Power/Status LED Extender status display