USER MANUAL media4Kconnect Special with RS232 & sound kvm-tec engineered 4K System 6935 Special redundant Set 6935L - Local unit 6935R - Remote unit 6936 Special uncompressed Set 6936L - Local unit 6936R - Remote unit Check out our Installation Channel: Misprints, errors and technical changes reserved 4K DP 1.
LINKS TABLE OF CONTENT 1. Introduction Do you want to learn more? Then simply click on the respective button and you will be forwarded directly to our homepage! 1.1 Intended use 7 1.2 Safety intructions 8 1.3 Technical specifications 10 1.4 Product elements 11 1.5 About the status LED 13 2. Extender Installation 14 2.2 Mounting kit 15 15 2.3 Installing the extender 15 2.4 media4Kconnect in the Matrix Vario System 18 2.5 Start up 19 2.6 Replacing the SFP module 19 2.
TABLE OF CONTENT 3.3 Update menu 26 5.2. Disposal 40 3.4 Settings 29 6. Support & First Aid 41 3.4.1 Defining what DDC data your PC uses 30 3.4.2 Select keyboard layout 31 3.4.3 Keyboard shortcuts 32 3.4.4 Keyboard Fallback Mode 33 3.4.5 Mouse Settings 33 3.4.6 Managing Local Settings 34 3.4.7 Video Sync Settings 35 3.4.8 Monitor power save mode 36 4. Extender Features 37 4.1.2 Matrix Switching System 38 4.1.3 USB Emulation mode 38 4.1.4 USB Save feature 38 4.1.
1. INTRODUCTION Congratulations on the purchase of your new media4Kconnect Special KVM Extender. You have bought a high quality extender. These instructions are part of this product. They contain important information regarding safety, use and disposal for every user of the media4Kconnect Special Extender. Please familiarise yourself with the information within prior to using your product. Use the product only in the manner as described and for the areas of application as stated.
1. INTRODUCTION 1.2 SAFETY INTRUCTIONS • • WARNING! Read and understand all safety instructions • Follow all the instructions. This will avoid accidents, fire, explosions, electric shocks or other hazards that may result in damage to property and/or severe or fatal injuries. Please ensure that everyone who uses the product has read and followed these warnings and instructions. • Keep all safety information and instructions for future reference and pass them on to subsequent users of the product.
1. INTRODUCTION 1.3 TECHNICAL SPECIFICATIONS Type: Model: media4Kconnect Fiber KVM Extender Power plug input voltage 2 x 12 VDC 2 A external Power supply redundant supply tolerances DC: +20% / -15% Redundant Power supply 12 VDC > 2A Power requirement 12W without USB devices Operating temperature 0 ºC to 45 ºC (32 bis 113 °F) Storage temperature −25 ºC bis 80 ºC (-13 to 176 °F) Relativ humidity: max.
1. INTRODUCTION 1. INTRODUCTION 1.5 ABOUT THE STATUS LED Local Extender (CPU) LED Status Update: Color Light display Autoupdate Mode fast flashing Update runs shining Update fails shining Update successful Bedeutung LED Anzeigen Color 12 Nr. Name Function 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Audio in Audio out RS232 DC DC kvm-link kvm-link dp in USB 2.
EXTENDER INSTALLATION INSTALLATION 2.2.EXTENDER 2. EXTENDER INSTALLATION 2.1 UNPACKING AND CHECKING THE CONTENT 2.2 MOUNTING KIT Before using the product for the first time it should be checked for damage. In case of damage due to transport inform the carrier immediately. Before delivery the product is checked for its function and its operating safety. 2.2.
DP out to Monitor Audio out to Speaker DP in from PC USB from keyboard and mouse USB to PC RS232 plug power supply for 12V 2A RS232 plug Duplex multimode OM4-fiber cable (LC) up to 300m/984 ft main link 1 Duplex multimode OM4-fiber cable (LC) up to 300m/984 ft redundant Duplex multimode OM4-fiber cable (LC) up to 300m/984 ft main link 2 1. Connect the CON/Remote and the CPU/Local Unit with the supplied 12V 2A power supply. 2.
2. EXTENDER INSTALLATION 2. EXTENDER INSTALLATION 2.4 MEDIA4KCONNECT IN THE MATRIX VARIO SYSTEM 4K To start up the system: 1. Make sure that monitor and computer are switched on. 2. If you are using a Network Switch, connect the power cable to an earthed wall socket. 3. Connect both extender power cables ( 6 / 20 ) to an earthed wall socket. Switch on both units. Both extenders start an initialization process.
2. EXTENDER INSTALLATION 2. EXTENDER INSTALLATION 2.8 BEST PRACTICE FOR WINDOWS 10 2.7 REMOVING A FIBER CABLE Disable USB Energy Savings in Windows 10 To remove a fiber cable: • Press the latch down and slowly pull the cable out.
2. EXTENDER INSTALLATION 22 | 2.
3. MAIN MENU & SETTINGS 3. MAIN MENU & SETTINGS 3. USING ON SCREEN MENU 3.1. SYSTEM STATUS Use the monitor and keyboard to access the main menu. Access to the main menu 1. Make sure that the extenders, monitors and computer are turned on 2. Press the Scroll Lock button five times one after the other. The main menu and the overview of the submenus are displayed. 3.
3. MAIN MENU & SETTINGS 3. MAIN MENU & SETTINGS 3.3 UPDATE MENU Display of firmware version By pressing the „U“ key or by selecting the arrow keys, you reach the update menu, in which the firmware of the Extender will be displayed and can be updated. 1. The current version of the firmware can be downloaded at http://www.kvm-tec.com/ support . Each update file contains a detailed description of the update process. For further information please refer to the update chapter 2.
3. MAIN MENU & SETTINGS 3. MAIN MENU & SETTINGS 3.4 SETTINGS By pressing the „G“ key or selecting the arrow keys you will have access to the Settings menu, where you can access all Extender settings. SCREEN „ Update“ SCREEN „Settings“ The UPDATE process is now started and takes place in two steps: 1. Erasing flash: erases the memory 2.
3. MAIN MENU & SETTINGS 3. MAIN MENU & SETTINGS 3.4.2 SELECT KEYBOARD LAYOUT 3.4.1 DEFINING WHAT DDC DATA YOUR PC USES In the Keyboard Layout menu you can switch between the keyboard layouts with which you can navigate the on screen display menu (OSD). Definition of the DDC information used in the PC: Make sure that the main menu is open ( 5 x scroll) 1. Press the O to display the DDC-option menu 2. Press 1 to display the DDC information of the monitor connected to the remote (CON) 3.
3. MAIN MENU & SETTINGS 1. 4K Multiview Commander 3. MAIN MENU & SETTINGS 3.4.4 KEYBOARD FALLBACK MODE 3.4.3 KEYBOARD SHORTCUTS By pressing the „S“ key or by selecting the arrow keys you will access the Keyboard Shortcuts menu. To use the OSD menu, the keyboard on the remote device must be identified. For most keyboards, use the 0 setting. When using USB, some mice act like a keyboard. In this case, select fallback mode 1 or 2.
3. MAIN MENU & SETTINGS 3. MAIN MENU & SETTINGS 3.4.6 MANAGING LOCAL SETTINGS 3.4.7 VIDEO SYNC SETTINGS By pressing the L key, or by selecting the arrow keys, you can access the Menu Local Settings Pressing the „V“ button or selecting the arrow buttons selects the Video Sync Settings menu. Press the L key to open the Local Settings. Here you will find the Remote Wakeup setting. SCREEN „Video Sync Settings““ This feature can be used to determine the control loop for video synchronization.
3. MAIN MENU & SETTINGS 4. EXTENDER FEATURES 3.4.8 MONITOR POWER SAVE MODE 4. FEATURES Power saving mode: The monitor turns off when no video signal is transmitted 4.1 MENU FEATURES Pressing the „F“ key or selecting the arrow keys, you will access the FEATURES menu, where you can select all the functions and the features.
4. EXTENDER FEATURES 4. EXTENDER FEATURES 4.1.2 MATRIX SWITCHING SYSTEM 4.1.6 UNCOMPRESSED MODE Pressing „S“ takes you to the Matrix Switching System configuration. If this function is active, the Multiview Commander and Mouse Glide functions are controlled via the Switching Manager software (see Switching Manager manual). All functions of the switching system can be controlled via the Switching Manager software can be operated.
6. SUPPORT & FIRST AID kvm-tec 5. MAINTANCE & CARE 5.MAINTANCE AND CARE 5.1 EXTENDER CARE Caution! Do not use solvent-containing cleansers. Do not use wipes, alcohols (e.g. spiritus) or chemicals as these could damage the surface. 5.2.
6. SUPPORT & FIRST AID Error Cause solution LED is not lighting The devices get no power Is the power supply connected?Ne start device LED is lighting in red No connection between Loc and Rem Check if the RJ45/network cable is connected well. (Clicking noise when plugging in) Control both, if it does not work please send an e-mail to support@kvm-tec.com or phone +42 2253 81912 LED is lighting in orange No picture on the monitor Check if the local (PC) cable is connected well.
9. WARRANTY 11. WARRANTY 8. SWITCH SPECIFICATION 8. REQUIREMENTS NETWORK SWITCH 9. WARRANTY The entire switching network system requires its own separate network. For security reasons, it cannot be integrated into an existing corporate network. The warranty period is 24 months from the date of purchase.
10. ADDRESS & PHONE / EMAILS 11. NOTES 10. ADDRESS & PHONE/EMAIL If you have any questions about our products, please contact kvm-tec or your dealer. kvm-tec electronic gmbh Gewerbepark Mitterfeld 1A 2523 Tattendorf Austria Phone: 0043 (0) 2253 81 912 Fax: 0043 (0) 2253 81 912 99 Email: support@kvm-tec.com Web: www.kvm-tec.com Find our newest updates and FAQs on our homepage: kvm-tec Inc. USA Sales p+1 213 631 3663 & +43 225381912-22 email: officeusa@kvm-tec.
