Operation Manual

TracVision M9 User’s Guide
48
Appendix A - Advanced Settings and Functions
Changing the Sidelobe Mode Setting
When the Sidelobe Mode is set to on, the antenna takes additional time
to validate the satellite signal. Only change the Sidelobe Mode setting
if directed by KVH Technical Support. Use the flowchart in Figure A-3
if you need to change the Sidelobe Mode setting.
TIP: The default Sidelobe Mode setting is off.
Figure A-3 Changing the Sidelobe Mode Setting
Sat B Menu Sat C
Tracking Satellite A
Yes Next Return
Install Satellite?
Yes Next Return
Operations Mode?
Yes Next Return
Get Antenna Status?
Yes Next Return
Control Antenna?
Yes Next Return
Man Control Antenna?
Yes Next Return
Set Sidelobe On/Off?
On Return Off
Sidelobe Mode:
Select “ Next ” until “Set
Sidelobe On/Off?” is displayed.
Select “
On ” or “Off.” Then
select “Enter.”
Select “Next” until “Operations
Mode?” is displayed.