Operation Manual

TracVision M5/M7 User’s Guide
53
Chapter 3 - Settings
Selecting Automatic or Manual Satellite Switching
When your TracVision system was configured, the satellite switching
method (automatic or manual) was also selected. However, you can
use the flowchart in Figure 3-26 to change the satellite switching
method for your selected service, if desired.
NOTE: While most TracVision configurations support automatic switching,
Custom Dual-Sat configurations and any configurations with a multiswitch
installed require manual switching. For more information on satellite
switching options for your selected configuration, refer to the applicable
service setup instructions in this chapter.
Figure 3-26 Setting the Satellite Switching Method
<Default Display>
Menu
Install Satellite?
Yes Next Return
Install Satellite?
Yes Next Return
Set Sat Switch Type?
Yes Next Return
Sat Switch: Auto
Auto Enter Manual
Choose your satellite
switching method, then
press Enter.