Operation Manual

TracVision M5/M7 User’s Guide
52
Chapter 3 - Settings
Step 2 - Adjust the LNB Skew Angle
Now that you have installed the desired satellites and recorded the
skew angle, you need to adjust the antenna’s LNB skew angle to
optimize signal reception. Follow the instructions in “Adjusting the
Skew Angle (Linear Versions)” on page 31 to adjust the skew angle.
NOTE: To enable automatic satellite switching, the receiver must be set up to
match the TracVision system’s satellite settings. Refer to “Linear Receiver
Configuration” on page 25 for more information.