Operation Manual

TracVision M5/M7 User’s Guide
29
Chapter 3 - Settings
Updating Latitude and Longitude Data
Use the flowchart in Figure 3-1 if you wish to update your latitude and
longitude data.
TIP: For your convenience, you can determine your approximate latitude and
longitude using the Position Grids provided in Appendix B on page 75.
Figure 3-1 Updating Latitude and Longitude Data
<Default Display>
Menu
Operations Mode?
Yes Next Return
Get Antenna Status?
Yes Next Return
Select Next until “Operations
Mode?” is displayed.
Control Antenna?
Yes Next Return
Set Lat/Long?
Yes Next Return
Select Next Until “Set
Lat/Long?” is displayed.
Restarting Antenna
Man Control Antenna?
Yes Next Return
Install Satellite?
Yes Next Return
Press - or + to toggle each
digit to the desired value, then
press Enter to accept each digit.
Press - or + to toggle each
digit to the desired value, then
press Enter to accept each digit.
Latitude: ##N
- Enter +
Longitude: ###E
- Enter +