Operation Manual

TracVision M5/M7 User’s Guide
17
Chapter 2 - Operation
DISH 1000 Manual Mode - Required for Three or More Receivers
Since multiswitches interfere with communications between the
receivers and the antenna, the system must be set up in Manual mode
when three or more receivers are installed. When Manual mode is
enabled, you can switch between your selected satellites using the
buttons on the front of the MCP (see Figure 2-8 and Figure 2-9). You
can use the receivers’ remote controls to switch between the channels
on the currently selected satellite.
Figure 2-8 DISH 1000 Manual Mode - Receiver/MCP Controls
Figure 2-9 DISH 1000 Manual Mode - MCP Displays
MCP
Buttons used
to switch satellites
RF2
Grounding
Block
RF1
Switchplate
Antenna
All Receivers
Changes
channels on
current satellite
Multiswitch
Tracking DISH 119
110 Menu 61
DISH 1000/61
Tracking DISH 119
110 Menu 129
DISH 1000/129
OR
Press
for 110
Press
for 61
Press
for 110
Press
for 129
Satellite Being
Tracked
Satellite Being
Tracked