Operation Manual

TracVision M3/M2 User’s Guide

Chapter 3 - System Preferences

3. Press CHANGE again. A cursor appears under the

first number in the displayed latitude.

4. Press CHANGE until the number is set to the first

digit of your vessel’s current latitude.

5. Press ACCEPT. The cursor moves to the next number.

6. Repeat steps 4 and 5 to set the remaining digits (plus

North/South and East/West directions) of your

latitude and longitude. Once you have set the entire

position, the cursor disappears from the display.

7. Press ACCEPT. The antenna restarts. Wait one

minute for system startup.

LAT/LONG= 41N, 071W

CHANGE ACCEPT

LAT/LONG= 51N, 071W

CHANGE ACCEPT

LAT/LONG= 55N, 012E?

CHANGE ACCEPT