Operation Manual

TracVision M3/M2 User’s Guide

Chapter 2 - Operation

2. Press ACCEPT.

3. Press CHANGE until the display shows the correct

polarization and band for the desired channel.

There are four possible combinations of polarization/band:

TIP: Polarization and band information for various channels is

available at www.lyngsat.com (site not affiliated with KVH).

4. Press ACCEPT.

The antenna switches to the selected satellite and polarization/

band.

NOTE: The antenna remains in manual switching mode until you

change it back to automatic switching. See “Changing the Satellite

Switching Mode” on page 49.

Code Polarization Band

HL Horizontal Low

HH Horizontal High

VL Vertical Low

VH Vertical High

POLARIZATION/BAND=HL

CHANGE ACCEPT