Installation Instructions

TracVision M3/M2 Installation Guide
1
KVH, TracVision, and the unique light-colored dome with dark contrasting baseplate are registered trademarks of KVH Industries, Inc.
All other trademarks are property of their respective companies. The information in this document is subject to change without notice.
No company shall be liable for errors contained herein. © 2008 KVH Industries, Inc., All rights reserved. 54-0274-02 Rev. B
Linear Configuration
These instructions explain how to install the TracVision M3/M2 satellite TV antenna system on
a vessel. Complete instructions on how to use the system are provided in the User’s Guide.
Installation Steps
Who Should Install the System?
To ensure a safe and effective installation, KVH recommends that a KVH-authorized marine
technician install the TracVision antenna. To find a technician near you, please visit
www.kvh.com/wheretogetservice.
Related Documentation
The following additional documents are provided with the TracVision M3/M2 system:
Technical Support
If you need technical assistance, please contact KVH Technical Support:
1. Inspect Parts and Get Tools...3
2. Plan the Installation...4
3. Prepare the Mounting Site...5
4. Wire the Antenna...6
5. Remove the Shipping Restraint...7
6. Mount the Antenna...8
7. Wire the Interface Box...9
8. Connect Power...10
9. Mount the Interface Box...11
10. Turn On the System...12
11. Enter Your Latitude & Longitude...13
12. Select Satellites...14
13. Set the LNB Skew Angle...15
14. Educate the Customer...16
Document
Description
User’s Guide Operation, setup, and troubleshooting information
Product Registration Form Details on registering the product with KVH
Warranty Statement Warranty terms and conditions
Contents List List of every part supplied in the kit
North/South America, Australia:
Phone: [phone]
E-mail: [e-mail]
(Mon.-Fri., 9 am-6 pm ET, +5 GMT)
(Sat., 9 am-2 pm ET, +5 GMT)
Europe, Middle East, Asia:
Phone: [phone]
E-mail: [e-mail]
(Mon.-Thu., 8 am-4:30 pm, -1 GMT)
(Fri., 8 am-2 pm, -1 GMT)