User Guide

54-0350
4.3
Completing the Installation
4-1 Post-installation Checklist
Congratulations! You’ve completed the TracVision A7
installation. Before you turn on and test the system,
please make certain that you have completed the
following important steps:
Step Page # Done?
You affixed the antenna serial number label to the red Activation Card . 1.7
You removed the antenna’s shipping restraints from below. 2.3
You attached the mounting brackets to the antenna using the supplied 2.4, 2.8, 2.13,
hardware. 2.15
Rack or Hummer Mount: You verified the roof rack crossbars are 2.4, 2.12, 2.14
securely fastened to the vehicle and are sturdy enough for the antenna.
Rack Mount: You positioned the rubber cushions within the antenna 2.5
mounting brackets to best fit the vehicle’s crossbars.
Rack or Roof Mount: You allowed enough clearance between the 2.6,2.9
antenna and the roof.
Roof Mount: You attached the mounting plates to the roof using 2.9
appropriate fasteners and sealed them to prevent leakage.
Hummer Mount: You inserted the supplied T-nuts into the center channel 2.12, 2.14
of the crossbars.