User Guide

54-0350
3.3
Installing the Receiver
3-1 Choose the Receiver Location
Now that you’ve installed the antenna, you need to
find a suitable location inside the vehicle for
installing the receiver. The receiver should be
installed in an area that meets the following
requirements:
• Dry
• Well-ventilated
• Away from heat sources
• Allows enough open space (at least 2" around)
for ventilation and cable connections
3-2 Wire the Receiver
For the TracVision system to work, you will need to
connect the following cables to the receiver:
• Antenna cable
• RF converter cable
• Audio/video (A/V) cables
• DC power cable
The procedures in this section are intended
for a basic wiring configuration. If the
vehicle’s entertainment system is wired
differently, use these procedures as a guide
and connect the cables as needed to suit
the vehicle’s particular configuration.
This section explains how to wire a single
TracVision mobile receiver. For details on
connecting additional receivers, refer to
Appendix A in the TracVision Mobile
Receiver User’s Guide.