TracVision G8 Owner's Manual

3.2 Main Display and Accessing
the Main Menu
As soon as the startup routine is completed, the LCD panel shows
the main display, which shows which satellite the antenna is
currently tracking. The buttons allow you to switch between the
two installed satellites as well as enter the main menu. The button
functions are as follows:
Figure 3-2 Main Display and Button Functions
Main Menu
Pressing the center button will cycle the main menu through the
available functions as follows:
Figure 3-3 Main Menu Functions
54-0198
60
TracVision G8 Owner’s Manual - Guide to Technical Information
Tracking <SAT NAME>
Sat A Menu Sat B
Track Installed
Satellite A
Track Installed
Satellite B
Enter
Main Menu
Install Satellite?
Yes Next Return
Tracking <SAT NAME>
Sat A Menu Sat B
Proceed to Section 3.3,
"Installing Satellites"
Restart Antenna?
Yes Next Return
Operations Mode?
Yes Next Return
Select Installed Satellite A Select Installed Satellite B
Proceed to Section 3.4,
"Restarting the Antenna"
Proceed to Section 3.5,
"Operations Mode"
Return to Main Display
Return to Main Display
Return to Main Display
Return to "Install
Satellite"