TracVision G8 Owner's Manual

54-0198
54
TracVision G8 Owner’s Manual - Guide to Technical Information
2.9 Changing Geographic Location
If you move to a different geographic area, you will need to
modify your TracVision G8 system to receive satellite TV signals
in the new location. To begin receiving satellite signals in the new
area, perform the following steps.
Swap LNB/Feed Tube Assembly
To receive the proper satellite signals in the new geographic
location, your TracVision antenna must be equipped with the
appropriate LNB/feed tube assembly for that location:
Table 2-6 Required LNB or LNB/Feed Tube Assembly for New
Geographic Location
Moving from: Moving to: Order from KVH:
North America Latin America DLA circular dual LNB
North America Europe Linear quad LNB/feed tube
Latin America Mexico
Australia
Latin America North America Standard circular dual LNB
Europe North America Standard circular dual
Mexico LNB/feed tube
Australia
Europe Latin America DLA circular dual
Mexico LNB/feed tube
Australia
Table 2-7 lists the part numbers for ordering these various
options.
Table 2-7 LNB and LNB/Feed Tube Assembly Part Numbers
Part Name Part Number
Standard circular dual LNB 02-0870
Standard circular dual LNB/feed tube assembly 02-1282-01
DLA circular dual LNB 02-0870-01
DLA circular dual LNB/feed tube assembly 02-1282-03
Linear quad LNB/feed tube assembly* 02-1282-04
* The linear quad LNB/feed tube assembly includes a skew control mechanism
that allows the antenna to automatically adjust skew for changes in region and
satellite service.