Datasheet

Kvaser D-sub 9 pin 120 Ohm termination adapter
Kvaser D-sub 9 pin 120 Ohm termination adapter
73-30130-00801-4EAN:
Kvaser D-sub 9 pin 120 Ohm termination adapter is a CAN adaptor with a 9-
pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the
other. Between CAN High (pin 7) and CAN Low (pin 2) there is a built-in 120
Ohm CAN terminating resistor.
This adapter provides quick and easy termination to any Kvaser high-speed
CAN product. The Kvaser CAN termination adapter is used when there is a
need to terminate a CAN node without internal termination or when no CAN
node is connected to the bus. The Kvaser D-sub 9 pin 120 Ohm termination
adapter has a 9-pin male D-Sub plug connector and a 9-pin female D-Sub
socket. A 120 ohm terminating resistor sits between pins 2 and 7.