Specifications

ManualsBrandsKVANCE ManualsAudio EquipmentWireless Earphone

CUSTOMER:

SPECIFICATION FOR APPROVED

PRODUCTS:

FPC

Antenna

PART NO:

Spec.:

YL-BTW98-V2

Data:

2022.

8.10

SUPPLIER

PREPARED BY

CHECKED BY

APPROVED BY

CUSTOMER

ACCEPTED BY

CHECKED BY

APPROVED BY

REMARK:Please send us one(or copy)of this approval with stamp after accepting,other copies filed

by the customer.

Tel: 18820170917

Fax: 0755-26976277

ShenZhen City WINWAVE Technology CO.,LTD.

BTW98-FPC Antenna

Summary of content (9 pages)

PAGE 1
ShenZhen City WINWAVE Technology CO.,LTD. SPECIFICATION FOR APPROVED CUSTOMER: FPC Antenna PRODUCTS: BTW98-FPC Antenna PART NO: YL-BTW98-V2 Spec.: 2022.8.10 Data: SUPPLIER PREPARED BY CHECKED BY CUSTOMER APPROVED BY ACCEPTED BY CHECKED BY APPROVED BY REMARK:Please send us one(or copy)of this approval with stamp after accepting,other copies filed by the customer.
PAGE 2
ANTENNA SPECIFICATION Contents .................................................................................................... 1 1. Project Information.................................................................. 3 1.1. Appearance and Dimensions............................................ 3 2. Electrical Characteristics..........................................................4 2.1. Test Environment Conditions...................................4 2.2. Measurement method..........................
PAGE 3
ANTENNA SPECIFICATION Revision history VERSIONS V1 V2 DATE 2022-01-10 2022-03-21 STATE First Version Second Version 2
PAGE 4
ANTENNA SPECIFICATION 1. Project Information 1.1. Appearance and Dimensions Test point Overall dimensions Golden finger Specifications 27.2mm*7.6mm 4.9*2mm，6*2.5mm Test result OK OK Drawing Inspection items Inspection results Material specification 25um copper+12.5um glue+12.
PAGE 5
ANTENNA SPECIFICATION 2. Electrical Characteristics 2.1. Test Environment Conditions Temperature Ordinary Temperature (5 to 35℃) Humidity Ordinary Humidity (25 to 85% RH) 2.2.
PAGE 6
2.3. ANTENNA SPECIFICATION Efficiency and Gain 2.3.1. Test system 2.3.2.
PAGE 7
ANTENNA SPECIFICATION 2.3.3. 3D Radiation Drawing 2.3.4.
PAGE 8
ANTENNASPECIFICATION 3. Notes 1、Pay attention not to be too close to the metal during installation to avoid affecting the antenna performance。 2、This antenna is only suitable for this model, and the position of the antenna cannot be changed.
PAGE 9
4. Reliability test Item Storage conditions ANTENNA SPECIFICATION Test methods and conditions Specifications and requirements Temperature, humidity and air pressure are as follows: 1、Temperature:-30℃~+80℃ 2、Air pressure: 45%-85% 3、Pressure :86Kpa-106Kpa salinity is in range of 5% Salt spray test ;PH6.5-7.2;Temperature 35 ±1℃;Corrosion time 16H. 10-2000-10HZ amplitude 1.