User Guide User guide
This manual is presented by KV2 Audio, to enable the clear and precise instructions for the safe practi-
ce and execution, suspension and general rigging of the VHD Loudspeaker products, using the VHD
FLYBAR system.
It is vitally important that operators and users familiarize themselves with all of the components, parts,
products and safety instructions, as described and indicated within this document, before attempting
any over-head suspension, ying and rigging.
The VHD Loudspeaker enclosures are designed with integral suspension points to facilitate secure
ying and rigging, providing that no modications or external parts are substituted, and that all
instructions are adhered to at all times.
KV2 Audio s.r.o operates a continuing process policy of attaining and improving standards.
This means that instructions and methods may be subject to change without notication, and it is the
sole responsibility of the operator/user to check for any updated information regarding safe ying
procedures whether locally or internationally.
There are accepted ‘General Rigging Practices’ appropriate to the entertainment industry and this
Document aims to encapsulate them specically to the safe suspension of the KV2 VHD Loudspeaker
systems described here.
It is extremely vital and important that only personnel whom have the qualications and certicates,
prior knowledge and experience of rigging techniques, attempt the execution of any overhead
suspension of KV2 products.
All advice and instructions expressed and stated within this document, are based upon the highest
engineering data available at the time of publication, from within the Country of manufacture, with
regards to materials and general practice techniques.
Specications are subject to change, due to constant testing, product updates and renements
and R&D.
‘General Rigging Practices’ means that Regulations and requirements are possibly subject to alterati-
ons in dierent countries and may be superseded locally.
KV2 Audio, as such is not responsible for the safety of any suspension, ying over-head of all specic
KV2 Audio Loudspeaker products, or Rigging congurations as executed in practice by users.
It is expressly the sole responsibility of the user to ensure that at all times any KV2 Audio product or
system is suspended and rigged in accordance with current International and local regulations.
All non KV2 Audio products such as hoists, clamps, wires, truss, supports used ,or required to suspend
KV2 Audio Loudspeaker systems are the sole responsibility of the user.
Introduction
WARNING ! - Safety Rigging
VHD Flybar
Introduction
Introduction
4