Manual

Features
Front panel
1) AC Mains Switch
The
SL3000 Amplier has a combination AC Main switch/circuit breaker on the front panel. If the switch shuts
o during normal use, push it back to the ON position once. If it will not stay on you should take the unit to
qualied service personnel to have it serviced.
2) LIMITER
Red LED, indicates that the audio limiter has been activated. This RMS limiter protects speakers against overload.
3) SIGNAL PRESENT
Green LED indicates when audio signal is present at the amplier input.
3) POWER ON/ THERMAL (AUTO RESET)
Green LED indicates that the AC power is on. When red, it indicates that the thermal limit of the SL3000 Amplier
has been exceeded and the unit has shut down.
POWER ON /
THERMAL (AUTO RESET)
SIGNAL PRESENT
LIMITER
431 2
SL3000
SL3000
Features
7