Manual

Drawing
SL412i
Drawing
18
The three-way, mid / high loudspea-
ker system shall incorporate four
12-inch mid-bass (MB) transducer a
8-inch mid range (MR) speaker and
a 1.4-inch exit compression driver
high frequency (HF) transducer. The
LF drivers are direct radiating, tuned
for optimum mid-bass response.
The HF and MR transducers shall be
loaded in constant directivity
mid/high horn assembly.
The system has a nominal coverage
pattern of 110° (horizontal) x 40°
(vertical).
The loudspeaker enclosure shall
have a slim shape and shall incorpo-
rate, two side handles with integra-
ted M10 suspension points, four
integrated internal braces with
eight M10 suspension points, two
M10 suspension point on the back.
The speaker cabinet shall be
nished with an ultra wear resistant
black polymer coating and tted
with a weather resistant perforated
steel grill. The system shall receive
power from a separate stereo
Amplier SL3000.
Amplier and controller module
SL3000 consisting of separate
power ampliers for high, midran-
ge and midbass transducers as
well as signal processing including
electronic band pass crossover
lters, phase alignment, time
correction, equalization and
speaker protection.
The speaker system shall connect
to the SL3000 via proprietary
cables terminated in Amphenol
AP-6 connectors. The three-way
mid / high loudspeaker system
shall be the KV2 Audio SL412.
SL412 Architects and Engineer’s
Specications