Manual

Silver spike

Transportation

For short distances dismantle the platter, remove belt and disconnect all cables. Block the

tonearm's tube and then the turntable with the subplatter can be transported as it is, providing

that it will not be tilted more then 15 degrees, which could cause oil leakage.

If the subchassis might possibly be tilted more than this angle you should remove the bearing

oil and it is advisable to protect the ruby ball.

Removal of the subchassis automatically seals the oil wells. Should the base chassis be held

vertically or upside down for more than a moment, it should be left for 3-4 hours in a

horizontal position before use.

All parts are heavy and can be easily damaged by sliding around a transport vehicle.

Repacking in the original boxes is, therefore, recommended.

Kuzma Ltd

Hotemaze 17A

SI-4205 PREDDVOR

SLOVENIJA

Phone: + 386 4 25 35 450

Fax: + 386 4 25 35 454

E mail: kuzma@s5.net