Installation Guide

Remove the fixture from its original packaging

and remove the mounting crossbar (1c) from

within the hardware package. Attach the

mounting crossbar (1c) to the electrical junction

box (1a) on the ceiling using the two screws (1e)

provided in the hardware package.

You are now ready to mount the canopy (2a) to the

mounting crossbar (1c). First connect all

wires (1b) correctly with the provided marrettes

(white to white “N”, black to black “L”, ground

to ground “G”). Align the threaded studs of the

mounting plate through the holes on the back of the

fixture (2a) and screw in the two nuts (2c) onto the

threaded studs(1d), this will secure the canopy (2a)

to the mounting crossbar (1c).

19054 28th Avenue Surrey, BC Canada V3S 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

20151217

You have now completed the installation of your

fixture, enjoy.

INSTALLATION SHEET

FM93820

Ceiling LED Pendant

START FROM HERE

Please Note:

• For dimming, a TRIAC type of dimmer is required.

•

Make sure power is completely off at the fuse box.

•

Have your fixture installed by a qualified licensed electrician

•

Prepare everything in a clear area.

•

Wear gloves at all times during this installation.

•

Read instructions carefully before you start assembly.

•

Keep this instruction sheet for future reference.

Technical Support: 1-877-452-6858

PAGE 1
FM93820 Ceiling LED Pendant START FROM HERE • Make sure power is completely off at the fuse box. • Have your fixture installed by a qualified licensed electrician • Prepare everything in a clear area. • Wear gloves at all times during this installation. • Read instructions carefully before you start assembly. • Keep this instruction sheet for future reference. INSTALLATION SHEET Please Note: • For dimming, a TRIAC type of dimmer is required. Technical Support: 1-877-452-6858 1.