Installation Guide

INSTALLATION SHEET
81711
Ceiling Pendant
START FROM HERE
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all time during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
2d.
3a.
3g.
3h.
1a.
2a.
1d.
1c.
1b.
1e.
2c.
2e.
20190909
1. Remove fixture from its original package
2. Separate mounting plate (1c) from canopy (2a) by
removing decorative nuts (2c)
3. Align mounting plate screws (1d) to desired orientation,
and then attach mounting plate (1c) to electrical junction
box (1a) using screws provided (1e) in hardware package
4. Determine hanging height of fixture by securing rods (2d)
to RTN (2e) and pendant body (3a)
5. For wall mount, overall fixture length must not exceed 18”
6. Make proper electrical connections (black to hot “L”, white
to neutral “N”, ground to “GND”) with wire nuts (1b)
provided in hardware package
7. Align and insert mounting plate screws (1d) through holes
on canopy (2a), secure with decorative nuts (2c)
8. Insert lamp (3g) into socket inside fixture body (3a), secure
with lamp holder (3h)