Installation Guide

19054 28th Avenue Surrey, BC Canada V3S 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

INSTALLATION SHEET

599002

Ceiling with round glass shade.

Remove the fixture from its original packaging. Remove

the canopy mounting bar (1b) from within the canopy and

attach to the junction box using the two screws (1a)

provided in the hardware package.

You can now connect all the wiring with the provided

marrets (white to white “N”, black to black “L” & ground

to ground “G”). Align the two holes from the canopy to

the two screws pointing down from the mounting bar

already attached to the junction box.

Fit canopy onto mounting bracket with washers and

screws. Screw to tighten.

Fit correct wattage of bulb into lampholders. (4a) Screw

shade into ceiling plate.

You have now successfully installed your fixture,

please enjoy.

1a.

1b.

START FROM HERE

▪

Make sure power is completely off at the fuse box.

Have your fixture installed by a qualified licensed

electrician

Prepare everything in clear area.

Wear gloves at all times during this installation.

Read instructions carefully before you start assembly.

Keep this instruction sheet for future reference.

Technical Support: 1-877-452-6858

20151130

PAGE 1
599002 Ceiling with round glass shade. 1. 2. 3. INSTALLATION SHEET Remove the fixture from its original packaging. Remove the canopy mounting bar (1b) from within the canopy and attach to the junction box using the two screws (1a) provided in the hardware package. START FROM HERE ▪ Make sure power is completely off at the fuse box. ▪ Have your fixture installed by a qualified licensed electrician ▪ Prepare everything in clear area. ▪ Wear gloves at all times during this installation.