User's Manual

SECTION 13—DIRECTIONAL SUPPLEMENT
13.3
13.3 TEST MODE
Pressing the Test (√) switch places the radar in test mode,
which is indicated by the “FORK TEST” displayed in the
message area. While in test mode, the radar will display all
speeds, both moving targets and non-moving targets such
as tuning forks. The unit will remain in test mode for 30
seconds. Selecting a new mode, such as changing from
stationary to moving, will refresh the timeout to 30 seconds
allowing fork testing of all modes.
NOTE: Pressing the test button while in test mode will
turn off test mode immediately.