User's Manual

SECTION 13—DIRECTIONAL SUPPLEMENT
13.1
13. DIRECTIONAL OPERATIONAL
SUPPLEMENT
13.0 DIRECTIONAL OPERATION
The Raptor RP-1 uses state-of-the-art signal processing to
determine the direction of travel of target vehicles. This
additional information aids the officer in better target
identification. This can be done by displaying the direction
of travel with the motorist speed or by selecting the
direction of vehicles to be displayed.
Definition of Terms:
STA ALL: Stationary mode: Detects both
approaching and receding vehicles. –
“STA ALL” shown in the Patrol display
area. The directional indicator above the
Target display area will show the
direction of target travel.
STA APR ONLY: Stationary mode: Detects approaching
vehicles only. – “STA APR ONLY”
shown in the Patrol display area.
STA REC ONLY: Stationary mode: Detects receding
vehicles only. – “STA REC ONLY”
shown in the Patrol display area.
Strongest Target: Displays speed of strongest target
vehicle signal regardless of speed.
Fastest Target: Displays speed of fastest target vehicle,
if this is not the strongest target signal.