User's Manual

SECTION 4—UNIT DESCRIPTION
4.5
C. SAME/
OPPOSITE
In moving mode this switch toggles
between the same direction or
opposite direction mode.
In stationary selective modes, this
switch toggles approaching only and
receding only directions.
This changes the modes of the active
antenna only. The inactive antenna
will retain its mode settings.
D. LOCK-RELEASE This switch is used for locking and
releasing target and patrol speeds.
E. FAST This switch is used to enable or
disable fastest target vehicle mode.
F. MODE This switch rotates the selected
antenna through the four modes of
operation.
1. Moving Mode.
2. Stationary ALL.
3. Stationary Approaching only.
4. Stationary Receding only.
G. IR
TRANSMITTERS
Two IR transmitter LEDs.
H. Screw Release Screw fastener to allow access into
the battery compartment.