User's Manual

SECTION 3—INSPECTION AND INSTALLATION

3.3

3.3 RADAR INSTALLATION

3.3.1 INDICATOR UNIT

CAUTION: Equipment mounted in 1994 and later

series police vehicles may interfere with the operation of

passenger side airbags. Please refer to the vehicle

manufacturer or your Kustom Signals District Manager for

additional information on safe mounting areas within the

vehicle.

1. The indicator unit consists of two components: the front

display panel, which contains the unit's LCD display

and control switches, and the processing unit, which

contains the main signal processing board. These two

components can be mounted in the vehicle as one piece

or they can be separated and mounted in different

locations.

The Raptor RP-1's display panel can be located

overhead, on the dashboard or on the radio rack. The

processing unit can be located under the dash, in the

glove box or under the front seat.

2. Locate the provided Display/Processing mount.

Position the display for best viewing position in the

patrol vehicle and secure the mount.

If the processing section is separated from the display,

consider mounting it in a convenient yet protected

location, i.e. under the dash, in the glove box or under

the front seat. The interconnect cable for the two

components attaches to the rear of the display panel and

front panel of the processing unit.