User's Manual

"   
A.4
NOTE: When the FalconHR DataLogger memory is
completely utilized, new locked target speeds will not
be stored until the unit is connected to a PC and the
DataLogger is cleared using TalonDL software
(provided by KSI).
Pressing the TEST switch while in the 'UtL' maintenance
screen will advance the unit to its normal operating mode.
A.3 FALCONHR PRINT OUT
The standard print driver in the FalconHR is for an Able
Systems Ap862-B printer. The FalconHR is connected to
the Able printer using KSI PN# 155-7127-00 cable. The
following is an example of the standard print slip:
SN# 1005/ 0130
TARGET 87
PATROL 60
MOV Km/h
14:08 02/24/04
Sign:_____________
Line 1—This line displays the internal serial number of the
FalconHR. If the unit has the DataLogger feature, there is
a slash and then the number of locks stored in the
DataLogger. In the example slip, the unit is serial number
1005, and this is the 130
th
lock stored in the DataLogger.
Line 2 – This line displays the Locked Target speed.
Line 3 – This line displays the speed of the patrol vehicle at
the time of the lock. If the unit was in stationary mode, this
line is omitted.