User's Manual

   
6.5
4. Lightly strike the lower speed tuning fork on a hard,
nonmetallic surface and place it in front of the antenna.
The PATROL window should read the speed stamped
on the tuning fork, +1 mph (+1 km/h).
5. While holding the lower speed fork in front of the
antenna, lightly strike the higher speed tuning fork and
place it in front of the antenna. The TARGET window
should display the difference between the lower fork
and the higher fork.
TARGET display tolerance is +1 mph (1 km/h).
PATROL
TARGET
TEST
Moving mode tuning
fork speeds are
indicated in the Target
& Patrol windows.
In Test mode the
TEST indicator
will flash.
6.4.3 MOVING--SAME DIRECTION TUNING FORK
TEST
1. While in the moving mode, press the SAME/OPP
switch on the remote control and place the unit in the
Same Direction mode.