User's Manual

  
4.3
C. Road Graphic Indicates Mode of operation: moving
or stationary. Indicates target
direction: approaching or receding.
D. PATROL Displays the patrol vehicle speed.
Displays the stationary directional
modes: Approaching only “APr”,
Receding only, “rEc”, or All “ALL”.
E. PWR Turns the unit on or off.
F. RNG (Range) Puts the unit in the range set mode.
Secondary function is the increment
(up) control.
G. Latch Press to unlatch radar from handle.
H. IR Detector Receiver for the IR remote control.
I. AUD (Audio) Puts the unit in the audio set mode.
Secondary function is the decrement
(down) control.
J. MODE Rotates the unit through the four
modes of operation.
1. Moving Mode.
2. Stationary “ALL”.
3. Stationary Approaching only
“APr”.
4. Stationary Receding only “rEc”.
K. TEST Puts the units in the test mode
indicated by the TEST indicator and
allows the unit to display tuning fork
speeds. Used to test the internal
accuracy and to light all indicators.
Also used to access the Backlight
feature.