User's Manual

SYSTEM OPERATION

8. Output Update Rate: The DRU II can be set to output

packets of speed data at rates of (8 times per second,

4 times a second, 2 times a second, once a second,

upon speed change, or when the user’s equipment

polls for data)

Note: If Output Update Rate is set to upon speed

change, the DRU II outputs speeds immediately when

the speeds changes by at least one unit or once every

two seconds if the speed is not changing.

If the DRU II is set to the Polled output, data is output

when the DRU II receives characters [“*P”] or

[“*P”0x0D].

Once all the selections have been made, click the Send

Setting button to send the configuration data to the DRU II.