User's Manual

SYSTEM OPERATION

3. Target Tracking: The DRU II can be set to Vehicle or

Sports tracking. With vehicle tracking, targets are

acquired with a longer tracking history and have a 2

second target hang time. Sports’ tracking has a quick

acquisition time and only a ½ second target hang

time.

4. Units of Measure: The DRU II can output speeds in:

a. Miles per hour (MPH)

b. Kilometer per hour (km/hr)

c. Feet per second (Ft/Sec)

d. Meters per second (Mt/Sec)

Note: All speeds are calculated in tenth units of

measure. The user selects if they want the output in

tenth or units.

5. Target Speed Range: The DRU II can quickly be set

to the Standard speed range for speeds from 5 – 120

MPH or the Full speed range for speeds from 1 – 150

MPH. For more flexibility the user can input a Low

Cutoff speed (speeds below this are not reported) and

a High Cutoff speed (speeds above this are not

reported.)

6. Output Protocol: The DRU II can output one of

several different protocols. Including outputs in

HEX, ASCII, multiple targets, tenth units, and many

more.

7. Output Baud Rate: The DRU II can be set to output

RS232 data at rates of (19200, 9600, 4800, 2400, or

1200) baud.