User's Manual

Double Button Presses

In Program and Multi Mode, if Quick Access view is selected, pressing both of the

CHANNEL/LAYER/ZONE/TRACK buttons simultaneously will select Quick Access Bank

Select Next Unused ID

When selecting an ID number to save a previously saved User object, press the PREVIOUS

and NEXT buttons simultaneously to jump between selecting the previously used ID

number, and the next unused ID number.

e Search page allows you to nd any term or series of characters within the currently

selected list or range of values. Hold the ENTER button and press one of the numeric

buttons 1-9 to view the Search page.

On the search page, use the category buttons to type the term you want to nd, then press

the ENTER button to search. For example, if the program list is selected and you want to

nd all programs containing the word “Horn,” you would type h-o-r-n followed by the

ENTER button. e Search page is not case-sensitive; it will nd upper and lower case

characters regardless of what you type.

After typing a term and pressing the ENTER button, the search page nds and selects

the rst instance of the term in the list (if it exists in the list). To nd and select the next

or previous instance of the term in the list, hold the ENTER button and press one of the

NEXT or PREVIOUS button to search for the next higher-numbered or previous lower

numbered object that contains the search term.

Note: Each combination of the ENTER button and a numeric button 1-9 allows you store a

dierent search term. For example, hold the ENTER button and press the 1 button, then

search for a term like “piano”. e term “piano” will now be available whenever you hold the

ENTER button and press the 1 button. Next, hold the ENTER button and press the 2

button, then search for “string”. e term “string” will now be available whenever you hold

the ENTER button and press the 2 button. A dierent term can be stored for each of the

numeric buttons 1-9. ese terms are stored until power o.