User Manual

Program Mode
Control Setup
6-9
Control Setup
Control Setup Overview
TheControlSetupisaSetupobjecteditedandstoredinSetupModebutusedbyProgram
Mode.TheControlSetupdefinestheCCdestinationsforthePC3K’sphysicalcontrollers(wheels,
sliders,pedals,etc.)inProgrammode.TheseassignmentsaretheMIDICCnumbersthatthe
PC3K’sphysicalcontrollerssendwhile
inProgrammode.ParametersintheProgramEditorcan
thenbeassignedtorespondtotheseCCnumbers.SeetheFigure 6‐2belowforavisual
depictionoftheControlSetup’srolewhileinProgramMode.Seethesectionsonpage 6‐11for
detailsonphysicalcontrollerdestinationsandprogram
parametersources.
TheprogramsinthePC3KfactoryROMhaveparametersassignedtorespondtothecontroller
destinationsofthedefaultControlSetup(126 Internal Voices).Thereforeyou’llwanttouse
126 Internal Voicesas theControlSetupinmostcases.
Note:Ifyoudon’tusethedefaultControlSetup,assignedparametersinthe
PC3K’sfactory
ROMprogramswillprobablynotrespondtothePC3K’sphysicalcontrollers.Don’teditthe
ControlSetupunlessyouareanadvancedMIDIuserandknowwhatyou’redoing.
AdvancedusersmaywishtouseadifferentcontrolsetupiftheyneedtosendspecificMIDI
controllernumbersto
theMIDIoutportwheninProgrammode.Youcanalsoprogramseveral
differentcontrolsetupsandswi tchamongthemfordifferentapplications.
Table 6‐4belowshowswhichpagesandparametersintheSetupEditoroftheControlSetup
haveaneffectonProgramsinProgrammode.AsidefromassigningMIDI
CCdestinationsfor
thePC3K’sphysicalcontrollers,theControlSetupallowsyoutosetotheravailableparameters
foreachphysicalcontroller,suchasScale,Curve,Add,andSwitchType(seeContinuous
ControllerParameters on page 7‐29fordetailsontheseparameters.)
Figure 6-2 Examples Of How The Control Setup Defines The PC3K’s Physical
Controller Assignments While In Program Mode
Program Mode
Control Sources:
Parameter
Program
Program Editor
Setup Mode
Setup ID#: 126: Internal Voices
Setup Editor
SlidA sends
Dest: Data (MIDI CC 6)
PC3K’s
Controllers
Slider A
(Data)
Physical
Default Control Setup:
FOOT SWITCH 1 sends
OnControl/OffControl:
Switch
Source: Sustain (CC 64)
(Continues
for all
Controller Destinations:
Pedal 1
controllers.)
(parameter is controlled by
the physical controller that
is sending MIDI CC 64)
Source: Data (CC 6)
(parameter is controlled by
the physical controller that
is sending MIDI CC 6)
(sustain) Sustain (MIDI CC 64)