User Manual

13-6
Storage Mode
The STORE Page
The STORE Page
PressingtheSTOREsoftbuttoncallsuptheStorepage,whereyoucanselectgroupsofobjects
fromthePC3Ktostoreasa.P3Kfileinthecurrentstoragedevice.Onlyusercreatedoruser
editedobjectscanbestored.
Note:Tostoreanindividualobjectorselectobjectsindividually
insteadofbyrange,pressthe
AdvncesoftbuttononthispagetogotoTheStoreAdvancedPage.SeeTheStoreAdvancedPage 
belowfordetails.
Atthetoprightofthepage,thedisplayshowshowmuchmemoryisavailableinthecurrent
storagedevice.Alongthebottom
ofthepagearetheStorepage’ssixsoftbuttons.Belowisa
descriptionofthefunctionofeachsoftbutton:
Select Selectordeselectthehighlighted Object/TypeorRange/Bank.Anasterix(*)appears
totheleftofselectedentries.
Clear Clearallselectionsinthecurrentfield.Notethatif
youpresstheClearsoftbutton
whileintheRange/Bankfield,onlyselectedRange/Bankentriesarecleared;
however,ifpresstheClearsoftbuttonwhileintheObjectTypefield,allselected
entriesinbothfieldsarecleared.
SetRng SetacustomrangeofobjectIDnumberstostore.Noteinthe
Range/Bankfieldthat
thelastentryis1...100Range.YoucansetthisrangeintheSetRangedialogueby
pressingtheSetRngsoftbutton.Ifyoutrytosetaninvalidrange—suchas102–23—
thenthePC3Kwillinformyouthattherangeisinvalid.
Advnce PresstheAdvnce
softbuttontogotoTheStoreAdvancedPagewhereyoucanstore
anindividualobjectorselectobjectsindividuallyinsteadofbyrange.SeeTheStore
AdvancedPagebelowfordetails.
Store Storetheselectedobjectstothecurrentstoragedevice.Pressingthissoftbuttoncalls
uptheSelectDirectory
dialogue.
Cancel ExitstheStorepageandreturnsyoutotheStoragemodepage.
Storing Overview
TostoreusercreatedoreditedobjectsfromthePC3K,youmustpickthetype(s)ofobject(s)to
saveandselecttheobjectIDrange(s)tosave(seethesectionsbelowfordetails.)Afterselecting
objecttypeandrange,presstheStoresoftbutton.Ifanyobjectswithintheselectedrange(s)
have
dependentRAMobjectsthathavenotbeenselected,youwillbeaskedifyouwanttosave
dependentobjects.Dependentobjectsshouldusuallybesaved.
AfterpressingtheStoresoftbuttonyouwillbepromptedtochooseadirectorytosaveto(seeThe
SelectDirectoryDialogue on page 13‐4for
details.)Next,theFileNamedialoguewillappear(see
TheFileName/NewDirectory/RenameDialogue on page 13‐5fordetails.)Namethefile,andpress