User Manual

Song Mode and the Song Editor
Song Mode: The METRONOME Page
12-13
AsettingofAutowillmakethattrackoutputaudiobasedonthesettingsfortheprogramused
bythattrack.ProgramoutputsettingsaresetintheProgramEditorusingtheOutputparameter
onthetoplineofPROGFXpage(seeOutput on page 6‐48fordetails)ortheOutputparameter

ontheLAYERFXpage(seepage 6‐49fordetails.)AsettingofPri.(primary)willoutputtrack
audiototheMAINBalancedAnalogOutputs.AsettingofSec.(secondary)willoutputtrack 
audiototheAUXBalancedAnalogOutputs.
The Rec, Play, and Stop Soft Buttons
ThesesoftbuttonsfunctionasdescribedinTheRec,Play,andStopSoftButtons on page 12‐7.
The Keep Soft Button
PressingtheKeepsoftbuttoncapturesthecurrentsettingsforeachtrack’sprogram,panning,
andvolumeastheinitialsettings.Remembertosaveifyouwantthesechangetobepermanent!
The Done Soft Button
IfnochangesweremadeintheMIXERpage,pressingtheDonesoftbuttoncallsuptheMAIN
page.Ifchangesweremade,pressingtheDonesoftbuttoncallsupthe“SaveChanges”dialog.
Song Mode: The METRONOME Page
AlloftheparametersaffectingthesequencermetronomeareontheMETRONOMEpage.Like
theotherpagesintheSongEditor,youcansavechangesmadeinthispage.
Parameter Range of Values Default
Metronome Off, Rec, Always Rec
Count Off Off, 1, 2, 3, 4 (StartOnly, Always) 1 (StartOnly)
Program Program List 998 Click Track
Channel 1 to 16 16
Strong Note 0 to 127 102
Strong Velocity 0 to 127 127
Soft Note 0 to 127 104
Soft Velocity 0 to 127 100