User Manual

10-18

MIDI Mode

The Soft Buttons in MIDI Mode

ThefirstthreesoftbuttonsselectthethreeMIDImodepages.ThePrgChgsoftbuttonletsyou

sendaprogramchangecommandonanyMIDIchannel.TheRsetChsoftbuttonletsyoureturn

allchannelparameterstotheirdefaultvalues.ThePanicsoftbuttonsendsanAllNotesOffand

AllControllersOffmessagestothePC3Kandonall16MIDIchannels.

Program Change (PrgChg)

Whenyoupressthissoftbutton,adialogappearsthatletsyousendprogramchangesoutthe

USBorMIDIOutport,butdoesnotchangeinternalprograms.TheChan/Layerbuttons,theUp/

Downcursorbuttons,andtheChan–andChan+softbuttonscanallbeusedtochangethe

channel

onwhichtheprogramchangecommandwillbesent.TheLeft/Rightcursorbuttons, the

Plus/Minusbuttons,theAlphaWheelandtheProg–andProg+softbuttonscanallbeusedto

changetheprogramchangenumberthatwillbesent.Whenyou’vesetthechannelandthe

programchangenumber,press

theSendsoftbuttontosendtheprogramchangecommand.Or

presstheCancelsoftbuttonifyoudon’twanttosendit.Youcan change thechannelandthe

programnumberasmanytimesasyouwantbeforeyoupressSend.Youalsocanusethe

alphanumericpadto

selectaprogramnumberdirectly.

Reset Channels (RsetCh)

Whenyoupressthissoftbutton,thePC3Kasksifyouwanttoresetallchannels.Ifyoupress

Yes,allsettingsontheCHANNELSpagewillreturntotheirdefaultvalues.Whentheproject’s

over,youcanresettheChannelstorestoretheaudioroutingtoeachindividualprogram

(a

valueofProg),ratherthanselectingeachchannel’spageandsettingthePairparameterbacktoa

valueofProg.PressNoifyoudecidenottoresetthechannels.

Panic

PanicsendsAllNotesOffandAllControllersOffmessagestothePC3KandallMIDIchannels.