User Manual

MIDI Mode
Program Change Formats
10-17
youhaveadifferentsetof200programsandsetupsatyourdisposal.Whenyou’ reusingthis
format,thePC3KwillrespondtoMC0or32messagesforselectingQAbanks,andtoPCHsfor
selectingentrieswithinthecurrentbank.PCHsselectentriesaccordingtotheir“chronological”
listingwithin
theQAbank(notaccordingtotheirIDs).
DependingontheQAbankentryyouwanttoselect,you’llsendthePC3KeitheraPCH(value0
to127),oraMIDIController0or32message(value0to127)followedbyaPCH.Sendinga
singlecommandwilllet
youselectfromarangeof10QAbanksandselectanentrywithinthat
bank(seethetablebelow).ToselectadifferentrangeofQAbanks,sendanMC0or32message
followedbyaPCH.
TheMC0or32messagesselectstherangeofQAbanks
(0sthrough70s),whilethePCHselects
thebankwithinthatrange,aswellastheentrywithinthatbank.NeithertheMC0or32northe
PCHselectsadifferentmemorybank.Infact,youcan’tchangethememorybankviaMIDIwhen
usingthisformat.Allprogram
andsetupselectionsaremadewithinthecurrentlyselected
memorybank.You’llknowwhichmemorybankisselectedbylookingattheIDofthecurrently
selectedQuickAccessbankinthetoplineoftheQuickAccessmodepage.
QAccess and MIDI Transmission
Ifyou’ reinQuickAccessmodeandyou’ reusingthe
QAccessformatfortheprogramchange
type,selectingQAbanksorbankentriesfromthePC3K(withthealphanumericbuttonpad,the
cursorbuttons,theAlphaWheel,thePlus/Minusbuttons,ortheChan/Layerbuttons)also
sendscorrespondingprogramchangecommandstothePC3K’sUSBandMIDIOutport.The
PC3Ksendseither
anMC0or32messagefollowedbyaPCH.Thefollowingtablesgivespecific
examples.
Command Type Value Range Result
MIDI controller 0 or
32 (MC 0 or MC 32)
0 to 127
Selects QA bank 0n, 1n, 2n, 3n, 4n, 5n, 6n, 7n in current memory bank
Standard (PCH) 0–127 Selects last digit (n above) of QA bank, and entry within that bank
Current
QA Bank
Entry From
Alphanumeric Pad
Commands Sent
MC 0 or 32 PCH
10010
19019
20020
29029
99099
12 8 1 0
19 9 1 99
20 0 2 0
29 9 2 99
75 9 7 59
100 0 0 0
105 9 0 59
110 9 1 99
117 7 1 77
119 9 1 99
Table 10-1 QAccess Program Change Examples