User Manual

9-26
Effects and Effect Mode
Effects Parameters
DiffBassGcontrolsthegainofabass‐shelffilteronthedifferencesignal.Byboostingthelow
frequencycomponentsofthedifferencesignal,youcanincreasethesenseofacoustic
envelopment.Rangeis‐79.0to24.0dB.
DiffBassFisthetransitionfrequencyforthebass‐shelffrequency.Rangeis16to
25088Hz.
Theprocessedsignalissplitintothreefrequencybands—Lo,Mid,andHigh—eachofwhichcan
bedelayedandpannedseparately.
Crossover1and2arethetwoCrossoverfrequenciesatwhichtheband‐splitfilterssplitthe
signalintothreebands.Thetwoparametersareinterchangeable:eithermayhaveahigher

frequencythantheother.Range is16to25088 Hz.
Pan[High/Mid/Low]setsthepanpositionforeachband.Rangeis‐100%(fullyleft)to100%
(fullyright.)
Delay[High/Mid/Low]setsthedelayforeachband.Rangeis0to1000ms.
Stereo Image
Thiseffectprovidesenhancementforastereosignal.It
alsofeaturesastereocorrelationmeter.It
usessomeparametersfromMonotoStereoand somefromStereoAnalyze(following).