User Manual

9-10
Effects and Effect Mode
The Chain Editor
Editing Effect-boxes
Toedittheparametersofaneffect,selectitseffect‐boxontheMAINpageandpresstheEdit
button.Foreacheffect,thereareoneormorepagesofparametersthatarespecifictothateffect.
SeeEffectsParameters on page 9‐12fordetailsonparametersforeachtypeofeffect.
Any
parametercontrolledbyaneffectModwilldisplayavalueofFxModandcannotbeedited.To
returntotheMAINpageofthechaineditor,presstheExitbutton.
The MOD Pages
Therearethreepagesforconfiguringeffectsmods:MOD1,MOD2,andMOD3.Allthreepages
areessentiallyidenticalinappearanceandfunction.SeebelowforanexampleMODpage:
Box
TheBoxparameterspecifieswhicheffect‐boxintheChaintowhichtheModwillbeapplied.
Param
TheParamparameterselects
whichparameterofthespecifiedbox’seffectwillbemodulated.
Adjust
TheAdjustparametersetsafixedvalueforthespecifiedparameter(Param)thatisapplied
beforeanymodulation.
Source
TheSourceparameterdeterminestheControlsourcethatwillmodulatetheparameter(Param)
inreal‐time.Thiscanbeanyofthenormal
channelControlsources(sliders,modwheel,pedals,
etc.)oroneoftheChain‐specificControlsources(FXLFOs,FXASRs,andFXFUNs).
Depth
TheDepthparameterdeterminestherangeofmodulationthattheControllerwillapply.When
theControlsourcehasavalueof0,theparameter’s(Param’s)valuewillbethe
Adjustvalue.
Whenthecontrolsourceisallthewayup,theparameter’s(Param’s)valuewillbetheAdjust
valueplustheDepthvalue.