User Manual

6-70

Program Mode

KB3 Editor: The OUTPUT Page

Usethispagetoroutethecurrentprogram’spost‐FXsignals.ThetwoPanparameters

correspondtothoseoftheVASTProgrameditorOUTPUTpage(Seepage 6‐31).TheOutGain

andDemoSong parameterscorrespondtothoseoftheVASTProgramEditorCOMMONpage

(Seepage 6‐35).

Exp Pedal

UsethisparametertosetwhichrearpanelCCPedalinputwillcontrolvolumeforthecurrent

KB3program.WithasettingofExpression/Foot,volumecanbecontrolledbyaCCpedal

pluggedintoeithertherearpanelinputlabeledCCPedal1(volume),ortherearpanelinput

labeled

CCPedal2(wah).WithasettingofExpression,volumecanbecontrolledbyaCCpedal

pluggedintotherearpanelinputlabeledCCPedal1(volume).WithasettingofFoot,volumecan

becontrolledbyaCCpedalpluggedintotherearpanelinputlabeledCC

Pedal2(wah).Witha

settingofNone, volumecontrolfrombothCCpedalinputsisdisabled.

KB3 Editor: The Program FX (PROGFX) Page

Thispageisthesameasthe VASTProgrameditorPROGFXpage(seepage 6‐47)exceptforone

importantdifference:thereisnoPre/Postinsertparameterforthea uxiliarysends.

KB3 Editor: The LFO, ASR, and FUN Pages

Therestofthepages—LFO,ASR,andFUN—arethesameforKB3programsastheyarefor

VASTprograms,sowewon’tdescribethemagainhere.Beginonpage 6‐38tofinddescriptions

ofthesepages.