User Manual

Storage Mode
Storage Mode Common Features
13-9
The LOAD Page
Pressing the LOAD soft button calls up the LOAD page (see below,) where you can load groups
of objects from .P3A, .PC3, .K26, .K25, or .KRZ les, individual objects from within those les, a
MIDI sequence le or les (.MID).
Use the cursor buttons, -/+ buttons or the alpha wheel to browse the les in the currently
selected storage device. See below for descriptions of the soft buttons on this page, which help
you browse and select the les in the currently selected storage device.
After selecting the le or les to load, press the OK soft button, and you will be prompted to
choose a bank to load the selected object(s) or MIDI le(s) into. See Loading Methods on page
13-11 for instructions on choosing a bank to load to after pressing OK.
Note: When selecting a le to load, le names on the Load page that are longer than eight
characters will be shortened to eight characters and spaces will be removed. (Thishasnoeecton
thenamesofobjectsstoredwithina.P3Aorothercompatibleletype.) When loading a MIDI le
(.MID) to Song mode, the PC3A will attempt to use the MIDI le’s internal sequence name as the
Song name. If the internal sequence name can not be loaded, the rst eight characters of the le
name will be used as the Song name. Shortened song names can be renamed in Song mode.
Select Select or deselect the highlighted le. An asterisk (*) appears to the left of selected
les. Multiple les can only be selected if they are in the same directory. Entering a
new directory will deselect all les.
SelAll Press the SelAll soft button to select or deselect all les in the current directory
(directories within the current directory will not be selected.) Entering a new
directory will deselect all les.
Parent Moves you up one level in the directory hierarchy. If the display is already at the root
directory, this button has no eect. Entering a new directory will deselect all les.
Open Open selected directory or view objects within a .P3A le or other compatible
Kurzweil le type for loading individual objects. See Loading Individual Objects From
a .P3A Or Compatible File Type below for instructions on opening .P3A and other
Kurzweil le types to view and load individual objects (see Appendix E for
compatibility details.) Entering a new directory will deselect all les. Viewing objects
within a .P3A le or other Kurzweil le will deselect any other les that had been
selected.
OK Load the selected .P3A le or other compatible Kurzweil le type. See Loading
Methods on page 13-11 for instructions on using the Load dialogue presented after
pressing OK.
Cancel Exits the Load page and returns you to the Storage mode page.