User Guide

PC2 Made Easy
5
A on the #1 Sound Select button. Following the A01, it will show a number and a
Program name. This shows you the name of the Program in the currently selected Zone
(more on this later).
3. Press the Next Group button. The top line of the display now shows S017 Touch Orch
(Setup #17) and the bottom line shows B01. This tells you that you have moved to
Group B but you are still on the #1 Sound Select button.
4. Press the #2 Sound Select button (also labeled Acoustic Piano 2). Now the display
shows S018 One Man Trio on the top line and B02 on the bottom line. Notice that you
have stayed in the same group - you are still in Group B but are now on the #2 Sound
Select button.
So whatÕs so great about all of this anyway? LetÕs say that you are creating your own
Setups and you need to switch between them quickly in a performance. Maybe you have
two different sets you are performing. You can save the Setups for a specific set all
within the same group. You save the Setups for the first set between Setups #1-16 in the
User bank. Then you save the setups for the second set inn #17-32. Once you go to MIDI
Setups mode and press the User button, you can use the Next Group buttons to get to
Group A (for the first set) or B (for the second set). Now you can switch between any of
your Setups (up to 16) with just a single button press by using the Sound Select buttons!
There is an IMPORTANT DIFFERENCE between MIDI Setups mode and Internal Voices
mode. When you are in MIDI Setups mode, pressing the Sound Select buttons will
always call up the appropriate Setup within the currently Selected Group - the group
wonÕt change unless you press the Previous or Next Group buttons, or use the Data
Entry section to go to a Setup in a different Group. But when you are in Internal Voices
mode, each Sound Select Button remembers whichever group it was last on.
1. Press the Internal Voices button.
2. Press the Sound Select #1 Button. Press the Previous Group button until the top line
of the display says Bank:0 Internal 1A.
3. Press the Sound Select #2 Button. Press the Previous or Next Group Button until the
display says Bank:0 Internal 2B.
4. Press the Sound Select #1 Button again. Notice that it goes back to Group A. If you go
back to Sound Select #2, you will see it jumps back to Group B.
This feature is useful because it allows you to choose your favorite program out of a
group and be able to call it up with a single button press when in Internal Voices mode.
This is remembered even after you turn the PC2 off.
There is another difference to be aware of. As mentioned before, in Setups Mode, the
numbers increment by one as you move through the Sound Select Buttons, so:
Group A Setups 1-16
Group B Setups 17-32
Group C Setups 33-48
etc.