User Guide

PC2 Made Easy
84
Incoming Controller numbers
below will be remappedÉ
Éto the Controller number (or special controller
function) assigned to this physical controller
MIDI 1 (Mod Wheel) Mod Wheel (Wheel 2)
MIDI 6 Slider A
MIDI 22 Slider B
MIDI 23 Slider C
MIDI 24 Slider D
MIDI 11 (Expression) CC Pedal 1
MIDI 4 (Foot) CC Pedal 2
MIDI 2 (Breath) Breath Controller
MIDI 88 SW1
MIDI 80 SW2
MIDI 81 SW3
MIDI 82 SW4
MIDI 83 SW5
MIDI 64 Switch Pedal 1
MIDI 66 Switch Pedal 2
MIDI 67 Switch Pedal 3
MIDI 21 Ribbon Section 1
MIDI 86 Ribbon Section 2
MIDI 87 Ribbon Section 3
Pitch Bend Pitch bend Wheel (Wheel 1)
Mono Pressure Pressure
Using the Copy Function
To copy all the parameters from one zone to another:
1. Call up the Setup. If you have already entered the Setup Editor, make sure you are
NOT on one of the parameters within the Controllers, Arpeggiator, or Effects menu.
2. Press Copy, then press the zone button for the zone you want to copy. Then press
Enter.
3. Press the >> button, then press the Zone button for the zone you want to paste into.
Then press Enter.
To copy all the parameters from one zone to a zone in a different Setup:
1. Call up the Setup that has the zone that you want to copy. If you have already
entered the Setup Editor, make sure you are NOT on one of the parameters within the
Controllers, Arpeggiator, or Effects menu.